What is tape measure? A yardstick or tape is a ribbon of cloth, plastic or metal with linear-measure markings, such as steel measuring tape. Surveyors use tape measures in order of length hectometers. This is a suitable measuring instrument. Its flexibility allows a measure of great length easily in pocket or toolkit and can measure around curves or corners.
How to read a tape measure?
Tape measures are often used to give astandard length for objects that have an irregular shape. But as Reed is a big problem for amateurs.
First you need to know marks a blade tape measure, both in inches and feet. Each foot is divided into 12 inches. The hook end always seems to be fixed. This specially designed slide a distance equal to its power, so that both internal and external, make sure the result is correct. The upper level has risen by 1/16-inch, so we read 16:01, 08:01, 16.03, 04.01, 16.05, 08.03, 16.07,02:01, 16.09, 08.05, 16.11, 04.03, 13/16, 08/07, 15/16 and 1 inch. The lower scale reads and 1/16-inch increments, so it's 16.01, 08.01, 3/16-inch player, and so on. If you use an 8 lines per inch, the volume has increased by half to find 2/16-inch. It is precisely when you have four lines or 16:04 "You centimeters and so forth.
For example
1: The longer a line in the customs area in the center. This is the half inch mark and there is one.
2: The next line is the shortest 4.1 "(aquarter of an inch) sign of an inch and there are only two of these.
3: and the third line is the shortest 8.1 "(one eighth of an inch) mark and there are four.
4: and, fourth shorter 16.1 "(inches XVI) and Mark, there are eight of them.
5: and some governments will go a step further, up to 1 / 32 ", but often this is that most measurements of wood cuts, be.other
Reviews tapes
If you use the meter has someProblem you noticed.
1: Not everyone has the same tape device. Each band contains information on linear measure, with plenty of both imperial and metric units. Imperial measures are generally used in the United States, including meters, kilograms and seconds. metric units, on the other hand, those used for the metric system, often in many countries outside the United States.
2: If you use the tape, pull the cartridge directly from the case to ahand.
3: Do not forget the back of the tape, look at some relevant information on the parameters. Because not all bands are created equal.
4: Pay attention to markings on ruler tape.On typical basic (smaller) units of 1 / 16. "If the distance between two inch marks (one inch), there are several lines of sixteen. This is the title, because an inch is 16/16th of an inch in length. Studs on 16 inch square to read, and is marked in red in the rule. rafters or floor joistsread at the centers of two feet and are marked with black in the rule.
5: Right-mark 1 inch is measured with one end of the object. Sometimes the metal hook becomes loose and can lead to oversized up to 16.1 inches. Be sure to deduct up to an inch from the measurement.
6: block thumb print to the tape in place that can make the result to hold in more detail.
Related posts: